Valve Cover LH

Valve Cover LH
1. Remove the intake manifold.








2. Remove the parts in the order indicated in the illustrations and tables.
3. To install, reverse the removal procedure.

Item 2: Ignition Coil Electrical Connector Removal Note
1. Detach the pin-type retainer on the wiring harness near the ignition coil electrical connector.





2. Disconnect the fuel injector electrical connectors and the harness standoff clips.

Item 5: Spark Plug Wire Retainers Removal Note





1. Disconnect the standoff clips and position the spark plug wires aside.

Item 8: LH Valve Cover Gasket Removal Note





1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean sealing surfaces. These tools cause scratches and gouges which make leak paths.

Clean and inspect the sealing surfaces. Install a new gasket, if necessary.