Valve Cover RH

Valve Cover RH

Removal and Installation
1. Release the fuel system pressure.
2. Disconnect the fuel tube from the fuel supply manifold.
3. Remove the intake manifold.








4. Remove the parts in the order indicated in the illustrations and tables.
5. To install, reverse the removal procedure.

Item 6: Fuel Supply Tube Removal Note

1. CAUTION: Use O-ring seals that are made of special fuel-resistant material. Use of ordinary O-ring seals can cause the fuel system to leak.

Discard the fuel supply tube O-rings and lubricate the new O-rings with clean engine oil.

Item 7: Spark Plug Wire Retainers Removal Note





1. Disconnect the retaining clips and position the spark plug wires aside.

Item 11: RH Valve Cover Gasket Removal Note





1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean sealing surfaces. These tools cause scratches and gouges which make leak paths.

Clean and inspect the sealing surfaces. Install a new caskets if necessary.