Body Support - Number 3
BODY SUPPORT - NUMBER 3Material:
Material
Removal and Installation
Upper and Lower Insulator
NOTE: Left side shown, right side similar.
1. Fold the rear seat forward.
2. Open the storage compartment.
3. Remove the body insulator plug
4. NOTE: This step may require holding the lower retainer with an appropriate tool.
Remove the body mount insulator bolt.
Lower Insulator
5. NOTE: If the lower body mount will not remove, loosely install the body mount bolt and tap on the body mount bolt head with a hammer.
Remove the lower body mount insulator.
Upper Insulator
6. Carefully raise the vehicle body enough to remove the upper body mount insulator.
Upper and Lower Insulator
7. NOTE:
- Apply Threadlock 262 E2FZ-19554-B meeting Ford specification WSK-M2G351-A6 or equivalent to the mounting bolt.
- No lubricants of any kind are to be used during body insulator installation.
To install, reverse the removal procedure.