Rear Floor Console

FLOOR CONSOLE - REAR

REMOVAL







1. NOTE: The console cover is removed to clarify the view. It does not need to be removed to remove console.

Remove the parts in the order listed in the illustration and table.

Item 5: Rear Console Assembly Removal Note

CAUTION: To prevent damage to the two plastic guide pegs located on the bottom of the console, pull the console straight up when removing.

1. Disconnect the electrical connector.

INSTALLATION
1. Install in the reverse order of removal.

Item 5: Rear Console Assembly Installation Note

CAUTION: To prevent damage to the two plastic guide pegs located on the bottom of the console, install the console straight down until the pegs are correctly seated in the holes.

1. Check for correct seating before installing the bolts.