Quad Buckets, Second Row

REAR SEAT CUSHION - QUAD BUCKETS, SECOND ROW

DISASSEMBLY

NOTE: Left-hand seat is shown, right-hand is similar.

1. Remove the second row, quad bucket seat.

Part 1:

Part 2:

2. Disassemble the parts in the order indicated in the illustration and table.

Item 1: Seat Backrest Bolts Disassembly Note
1. Release all of the seat backrest J-clips. Slightly raise the backrest trim cover.
2. Remove all of the staples in the backrest trim cover.
3. Pull the seat backrest material up and remove the four backrest bolts. Remove the backrest assembly.

Item 9: Cushion Trim Cover Disassembly Note

1. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat cushion foam pad.

Separate the hook and loop fasteners.







2. Release the cable from the seat riser and remove the cushion trim cover.

Item 16: Latch Disassembly Note

1. NOTE: The left and right latches with cables are one assembly and should not be separated.

Remove the latch assembly.

ASSEMBLY
1. To assemble, reverse the disassembly procedure.

Item 19: Riser Attachment Cable Assembly Note







1. Route the cable as shown.