Test N

PINPOINT TEST N: THE HAZARD LAMPS ARE INOPERATIVE

Test N1:

Test N1-N4:

Test N4-N5:

Normal Operation
The indicator flasher relay receives battery power through circuit 10 (LG/RD). The indicator flasher provides power to the multifunction switch through circuit 385 (WH/RD). Circuit 57 (BK) provides ground for the indicator flasher. When the hazard switch is turned on, the multifunction switch routes voltage to the turn/hazard lamps. The timed on/off cycle is determined in the indicator flasher relay and is set to flash approximately 80 times per minute when the hazard switch is turned on.

Possible Causes
- circuit 10 (LG/RD) open
- circuit 57 (BK) open
- circuit 385 (WH/RD) open
- indicator flasher relay
- multifunction switch