Rear

Disc

Removal and Installation

All except Ford single rear wheel axle

1. NOTE: The brake disc is part of the wheel hub on all axles except the Ford 10.50-inch axle for single rear wheel applications. Removal of the hub on a Dana axle is covered in Rear Drive Axle/Differential - Dana S135. The hub on a Ford axle for dual rear wheel applications is covered in Rear Drive Axle/Differential - Ford 10.50-inch Ring Gear.

Remove the hub.





2. Remove the rotor-to-hub bolts and separate the hub and rear disc brake rotor.

Ford single rear wheel axle





3. Remove and support the caliper and anchor plate assembly.
- Remove the anchor plate bolts.

All vehicles
4. Remove the disc.





5. To install, reverse the removal procedure.