Conventional

INSTRUMENT CLUSTER

REMOVAL

CAUTION: Prior to removal of the module, it is necessary to upload module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed.

1. Remove the instrument panel cluster finish panel.
2. Lower the steering wheel tilt adjustment.







3. Remove the four instrument cluster screws and pull the instrument cluster away from the instrument panel.
- Disconnect the electrical connectors.







4. If equipped, disconnect the transmission range indicator.
- Push in the two clips and pull out the transmission range indicator. Position the indicator aside and remove the instrument cluster.

INSTALLATION
1. To install, reverse the removal procedure.