Shift Interlock Solenoid: Service and Repair

REMOVAL





1. Remove the shifter top control panel.





2. Disconnect the electrical connectors.





3. Remove the shifter bezel.





4. Remove the bulb from the bezel.





5. Disconnect the electrical connector.





6. CAUTION: Extra force may be needed to lift up on the handle. Do not to pull too far or damage to the overdrive cancel button may result, as the wires may be pulled out of the switch.

Remove the screw and the handle.





7. Remove the clip and bolt from the brake shift interlock cable.





8. Disconnect the shift interlock cable.





9. Remove the instrument panel steering column cover.
1 Remove the screws.
2 Remove the instrument panel steering column cover.





10. Remove the instrument panel reinforcement.
1 Remove the screws.
2 Remove the instrument panel reinforcement.





11. Remove the nuts and lower the steering column.





12. Remove the screws from the brake shift interlock cable.





13. Remove the brake shift cable interlock actuator.

Installation

Part 1 Of 3:

Part 2 Of 3:

Part 3 Of 3:

1. To install, reverse the removal procedure.