Drive Pinion Seal

IN-VEHICLE REPAIR

Special Tools And Equipment:

Special Tool(s)

Material:

Material

Removal
1. Remove the pinion flange (4851).





2. Using a screwdriver, force the rear axle drive pinion seal metal flange up and strike it with a hammer.





3. Using gripping pliers and a hammer, remove the seal.

Installation
1. Coat the new rear axle drive pinion seal lips with grease.





2. CAUTION: Installation without the correct tool can result in early seal failure.

CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the seal and install a new seal.

Using the special tool, install the rear axle drive pinion seal.
3. Install the pinion flange.