Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> E 150 V10-6.8L VIN S >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor: Service and Repair

FUEL TANK PRESSURE SENSOR

Removal and Installation

All fuel tanks
1. With the vehicle in NEUTRAL, position it on a hoist.

Midship fuel tanks







2. Disconnect the electrical connector and the hoses and remove the fuel tank pressure sensor.

Aft-of-axle fuel tanks







3. Disconnect the fuel tank pressure sensor electrical connector.







4. Press down and rotate the fuel pressure sensor counterclockwise and remove from the fuel tank.

All fuel tanks
5. To install, reverse the removal procedure.
- Carry out the evaporative emission system leak test. Evaporative Emission System Leak Test
- Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle
pro multis · About Operation CHARM