Disassembly and Assembly
FUEL CONDITIONING MODULEDisassembly
1. Remove the fuel filter cover and drain the fuel from the housing.
2. Remove and discard the fuel filter and O-ring seal.
3. Remove the bolts and the fuel pump.
- Remove and discard the O-ring seals.
4. Remove the bolts and the pressure relief valve.
- Remove and discard the O-ring seals.
5. CAUTION: Do not remove the heater pan or damage to the fuel conditioning housing will occur.
Remove the bolts and the fuel conditioning mounting bracket.
Assembly
1. Install the fuel conditioning module mounting bracket and bolts.
2. Install new O-ring seals on the fuel pump and lubricate with clean engine oil.
3. Install the fuel pump and mounting bolts.
4. Install new O-ring seals on the relief valve cover and apply clean engine oil.
5. Install the pressure relief valve and bolts.
6. Install a new O-ring seal and fuel filter on the fuel filter cover. Lubricate the O-ring seal with clean engine oil.
7. Install the fuel filter cover.
- Tighten the fuel filter cover to 13 Nm (10 lb-ft).
- Rotate the fuel filter cover until the electrical connectors line up.