Plenum Chamber
PLENUM CHAMBERDisassembly and Assembly
1. Remove the plenum chamber.
2. Remove the floor/defrost door vacuum control motor.
1 Disconnect vacuum lines.
2 Remove the screws.
3 Lift the vacuum control motor off the mode door pivot shaft.
4 Remove the vacuum control motor.
3. Remove the panel door vacuum control motor.
1 Disconnect the vacuum line.
2 Remove the screws.
3 Lift the vacuum control motor off the mode door pivot shaft.
4 Remove the vacuum control motor.
4. Remove the vacuum lines.
5. To assemble, reverse the disassembly procedure.