Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Escape 2WD V6-3.0L VIN 1 >> Repair and Diagnosis >> Cruise Control >> Testing and Inspection >> Pinpoint Tests >> Test G: Flash Code 2 - Stoplamp Switch Circuit Failure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test G: Flash Code 2 - Stoplamp Switch Circuit Failure

PINPOINT TEST G: FLASH CODE 2 - STOPLAMP SWITCH CIRCUIT FAILURE


G1-G3:






Normal Operation
When the speed control actuator carries out the self-test, a voltage signal is sent through circuit 511 (LG). Circuit 511 (LG) carries the signal to the stoplamp bulbs, which then is routed to ground. If the signal fails to be grounded, flash code 2 is set by the speed control actuator.

Possible Causes
- circuit 511 (LG) open
- stoplamp bulbs
- stoplamp switch
- speed control actuator
pro multis · About Operation CHARM