Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Excursion 2WD V10-6.8L VIN S >> Repair and Diagnosis >> Body and Frame >> Frame >> Body / Frame Mount Bushing >> Service and Repair >> Body Support - Number 4 Lower, Excursion
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Support - Number 4 Lower, Excursion

BODY SUPPORT-NUMBER 4 LOWER

Removal and Installation

NOTE:
- Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
- The removal and installation of the LH body mount is shown, removal and installation of the RH body mount is similar.

1. Remove the third row seat.
2. Detach the lower portion of the rear quarter trim panel.
3. Detach the cross car scuff plate. Pull the carpet back.







4. Remove the plug.







5. Remove the bolt and washer. Discard the bolt.
6. Remove the lower body mount.

7. NOTE: No lubricants of any kind are to be used during body insulator installation.

To install, reverse the removal procedure.
pro multis · About Operation CHARM