Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Excursion 2WD V10-6.8L VIN S >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Leak Detection Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Leak Detection Valve: Service and Repair

EVAPORATIVE EMISSION CANISTER VENT SOLENOID

Removal and Installation







1. Disconnect the canister vent solenoid electrical connector.







2. NOTE: A twisting and pulling motion is necessary to remove the canister vent solenoid.

Remove the canister vent solenoid from the evaporative emission (EVAP) canister.

3. NOTE:
- Inspect and install new O-ring seals as necessary.
- Lubricate all O-ring seals with clean engine oil.

To install, reverse the removal procedure.
- Carry out the evaporative emissions canister leak test. Evaporative Emission System Leak Test
- Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle
pro multis · About Operation CHARM