Windshield Washer Pump: Service and Repair

WASHER PUMP AND RESERVOIR

Removal and Installation
1. Remove the battery tray.







2. Position windshield washer fluid reservoir aside.
1 Remove the bolts.
2 Position windshield washer fluid reservoir aside.







3. Remove windshield washer fluid reservoir.
1 Disconnect the electrical connector.

2 WARNING: Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label of washer solution container.

NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.

Disconnect the windshield washer hose. (If equipped, disconnect the rear window washer hose.)

3. Remove the windshield washer fluid reservoir.







4. Remove the windshield washer pump.

5. CAUTION: Do not make electrical connection prior to filling the windshield washer reservoir. Do not operate the windshield washer pump prior to filling the windshield washer reservoir.

To install, reverse the removal procedure.