RH

Exhaust Manifold RH








Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the exhaust gas recirculation (EGR) tube.
3. Remove the exhaust manifold to dual converter Y pipe nuts.
^ To install, tighten to 40 Nm (30 ft. lbs.).

4. Remove the nuts, the RH exhaust manifold and the gasket. Discard the gasket.
^ To install, tighten to 22 Nm (16 ft. lbs.).

5. NOTE: Install a new RH exhaust manifold gasket.

To install, reverse the removal procedure.