Plenum Chamber

PLENUM CHAMBER







Removal and Installation
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Removal and Installation, Removal and Installation

2. Remove the center instrument panel finish panel.
3. Remove the 2 audio unit screws.
4. Remove the audio unit.
- Disconnect the electrical connector

5. Remove the defroster duct.







6. Remove the 2 upper plenum chamber screws.







7. Remove the 3 lower plenum chamber screws.
8. Remove the plenum chamber.
9. To install, reverse the removal procedure.