Oil Pick Up/Strainer: Service and Repair

Oil Pump Screen and Pickup Tube





Material

Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the oil pan.





3. Remove the 3 bolts, the oil pump screen and pickup tube and the spacer and discard the O-ring.

Installation





1. CAUTION: Make sure the O-ring is in place and not damaged. A missing or damaged O-ring can cause foam in the lubrication system, low oil pressure and severe engine damage.

NOTE: Install a new O-ring and lubricate with clean engine oil.

Install the pick up tube spacer, oil pump screen and pickup tube and the 3 bolts.
1. Tighten to 25 Nm (18 ft. lbs.).
2. Tighten to 10 Nm (89 ft. lbs.).

2. Install the oil pan.