Brake Shift Interlock Actuator-Floor Shift
Brake Shift Interlock Actuator-Floor ShiftRemoval
1. Remove the transmission selector lever assembly.
2. Disconnect the electrical connector.
1 Disconnect the overdrive cancel button electrical connector.
2 Cut the tie strap holding the wire harness to the base of the shifter.
3. Remove the brake shift interlock actuator.
1 Remove the bulb from the housing
2 Cut the tie strap from the wire harness.
3 Remove the 2 screws and remove the brake shift interlock actuator.
Installation
1. Install the brake shift interlock actuator.
1 Install the brake shift interlock actuator and install the 2 screws.
2 Install the bulb into the housing
3 Install a new tie strap on the wire harness.
2. Connect the electrical connector.
1 Connect the overdrive cancel button electrical connector.
2 Install a new tie strap to the wire harness.
3. Install the transmission selector lever assembly.