Conventional

INSTRUMENT CLUSTER

Removal and Installation

NOTE: Prior to removal of the instrument cluster, it is necessary to upload the instrument cluster configuration information to the diagnostic tool.

1. Depower the supplemental restraint system (SRS).
2. Remove the instrument cluster finish panel.
3. Lower the steering wheel tilt adjustment.







4. Remove the 4 screws and position the instrument cluster away from the instrument panel.
- Disconnect the electrical connectors.







5. If equipped, disconnect the transmission range indicator.
- Push in the clips and disconnect the transmission range indicator.

6. To install, reverse the removal procedure.
- Download the instrument cluster configuration information from the diagnostic tool to the new instrument cluster.