Rear Seat Cushion

REAR SEAT CUSHION

Disassembly

All rear seats







1. Remove the rear seat cushion.







2. Detach the seat cover from the seat base.
- Detach the plastic retaining strip.







3. Remove the seat base.

3-door and 5-door







4. Detach the left and right-hand side of the seat cover.
- Cut the four hog rings on each side.







5. Remove the hog rings from the left and right-hand front edge of the seat cushion.







6. Cut the four hog rings on the left and right-hand side of the back edge of the seat cover.







7. Remove the seat cushion cover
- Remove the hog ring.

4-door and wagon

8. CAUTION: Use care when separating the seat cushion covering from the hook-and-loop fasteners to avoid tearing the fasteners from the seat foam.

Release the hook-and-loop strips and remove the cushion trim cover from the foam pad.

Assembly







1. To assemble, reverse the disassembly procedure.