Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Freestar V6-3.9L VIN 6 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair

Digital Transmission Range (TR) Sensor





Special Tool(s)

Removal
1. With the vehicle in NEUTRAL, position it on a hoist.





2. Place the transaxle range selector in NEUTRAL.





3. Disconnect the mass air flow (MAF) sensor and the breather tubes.





4. Remove the engine air cleaner lid.





5. Remove the air filter assembly.





6. Disconnect the digital transmission range (TR) sensor electrical connector.





7. Remove the manual control lever and cable.
^ Remove the nut.
^ Remove the manual control lever and cable.





8. Remove the 2 bolts and the digital TR sensor.

Installation





1. Install the digital TR sensor and loosely install the bolts.





2. Using the special tool, align the digital TR sensor and tighten the bolts.
^ Tighten to 10 Nm (89 inch lbs.).





3. Install the manual control lever and cable
1. Install the manual lever and nut.
^ Tighten to 13 Nm (10 ft. lbs.).





4. Connect the shift cable back onto the manual control lever.





5. Install the air filter assembly.





6. Install the engine air cleaner lid.





7. Reconnect the mass air flow (MAF) sensor and the breather tubes
8. Verify that the shift cable is correctly adjusted.
pro multis · About Operation CHARM