Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Freestar V6-3.9L VIN 6 >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair

"AllData Editors Note:

Customers have reported success using the following spark plug wire placement on the coil pack."






IGNITION COIL







Exploded View

Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the wiper motor and pivot assembly.
3. Disconnect the electrical connector from the ignition coil.

4. CAUTION:
- It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wires.
- Spark plug wires must be connected to the correct ignition coil terminal. Mark the spark plug wire locations before removing them.

Disconnect the 6 spark plug wires from the ignition coil.

5. Remove the 3 bolts and the ignition coil.
- To install, tighten to 7 Nm (62 lb-in).

6. To install, reverse the removal procedure.
pro multis · About Operation CHARM