Wheel Speed Sensor, Rear

Sensor-Rear





Material

Removal and Installation
1. Raise and support vehicle.





2. NOTE: Clean off dirt and foreign material that may have collected around the rear anti-lock brake sensor before removal.

Remove the rear Anti-Lock Brake System (ABS) sensor.
1 Disconnect the electrical connector.
2 Remove the bolt.
3 Remove the sensor.





3. NOTE: Thoroughly clean the mounting surface.

NOTE: Inspect the anti-lock brake sensor O-ring for damage; lightly lubricate the O-ring with axle lubricant.

To install, reverse the removal procedure.