Fuel Line Fittings - Push Release
FUEL LINE FITTINGS - PUSH RELEASEDisconnect
1. WARNING: The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark occurring, possibly causing a fire or explosion if fuel vapor or fuel liquid is present in the area.
Disconnect the battery ground cable.
2. Relieve the fuel pressure.
3. NOTE: The retainer clip must be held in while the tube is being disconnected.
Disconnect the fuel tube from the fitting.
1. Press the retainer clip in and hold.
2. Disconnect the fuel tube from the fitting.
Connect
1. Inspect the fitting and the tube for damage.
2. Remove any dirt or obstructions.
3. Push the tube into the fitting until it snaps into place.
4. Pull on the connection to make sure the fitting is secure.