Pickup Bed

PICKUP BED

Removal
1. Remove the tailgate.







2. Disconnect the taillamp wiring harness electrical connector.
3. Remove the fuel filler cap.







4. NOTE: Mark the position of the fuel filler cap tether for proper installation.

Remove the fuel filler neck screws.







5. CAUTION: Use care not to scratch the pickup bed.

NOTE: Label the pickup bed bolts because they are not identical and must be installed in the same location that they are removed from.

Remove the pickup bed bolts.

6. CAUTION:
- Use body decking protectors over the front corners of the pickup bed to prevent scratches.
- Lifting the pickup bed requires at least two people on each side.

Remove the pickup bed.

7. Inspect the J-nuts for damage. Replace the J-nuts if they are damaged.

Installation












1. To install, reverse the removal procedure.