Torque Specifications
TORQUE SPECIFICATIONSCYLINDER HEAD
Cylinder Head Bolts
Stage 1 5 Nm (44 inch lbs.)
Stage 2 15 Nm (11 ft. lbs.)
Stage 3 45 Nm (33 ft. lbs.)
Stage 4 additional 90 degrees (1/4 turn)
Stage 5 additional 90 degrees (1/4 turn)
Cylinder Head Bolt Re-use Always new
CAMSHAFT BEARING BOLTS
Camshafts Bearing Cap Bolts
Stage 1 Tighten the camshaft bearing caps one turn at a time until tight.
Stage 2 7 Nm (62 inch lbs.)
Stage 3 16 Nm (12 ft. lbs.)
INTAKE MANIFOLD
Intake Manifold Bolts 18 Nm (13 ft. lbs.)
CRANKSHAFT PULLEY
Crankshaft Pulley Bolt
Stage 1 100 Nm (74 ft. lbs.)
Stage 2 additional 90 degrees (1/4 turn)
EXHAUST MANIFOLD
Exhaust Manifold Bolts 54 Nm (40 ft. lbs.)