Conventional

INSTRUMENT CLUSTER

Removal and Installation
1. Depower the supplemental restraint system (SRS).






2. Remove the center instrument panel finish panel.
- Remove the screws.
- Disconnect the electrical connectors.







3. Remove the screws and remove the hood latch release handle.







4. Remove the screws and remove the instrument panel steering column cover.







5. Remove the bolts and the lower instrument panel reinforcement.
6. If equipped, position the column-mounted transmission range selector lever aside.







7. Remove the screws and pull the instrument cluster finish panel out from the instrument panel.







8. Disconnect the headlamp and the dimmer switch electrical connectors and remove the instrument cluster finish panel.







9. Remove the instrument cluster screws.







10. If equipped with an automatic transmission, remove the transmission range indicator.







11. Disconnect the electrical connectors and remove the instrument cluster.
12. To install, reverse the removal procedure.