Windshield Moulding

WINDSHIELD MOULDING

Removal and Installation
1. Remove the 2 A-pillar trim panels.
2. Remove the 6 windshield moulding nuts (3 each side).
3. Remove the 2 windshield moulding screws (1 each side).
4. Remove the 2 pin-type retainers, and the windshield moulding (1 each side).
5. Remove the 2 screws, release the center retainer, and remove the windshield header moulding (1 each side).
6. To install, reverse the removal procedure.