Brake Caliper Anchor Plate, Front

Brake Caliper Anchor Plate

Removal and Installation

Front Brake Components - E-150:

Front Brake Components - E250, E-350, Single Rear Wheel:

Front Brake Components - E-350, E-450 and Dual Rear Wheel:

1. Remove the brake pads.
2. Remove the 2 brake caliper anchor plate bolts and the brake caliper anchor plate.
^ To install (E-150), tighten to 175 Nm (129 ft. lbs.).
^ To install (E-250, E-350, E-450), tighten to 225 Nm (166 ft. lbs.).
3. To install, reverse the removal procedure.