Shield Removal and Installation, Rear
Brake Disc Shield - E-150, E-250, E-350Brake Disc Shield - E-150, E-250, E-350:
Removal and Installation
1. Remove the brake caliper anchor plate.
2. Index-mark and remove the brake disc.
3. Remove the parking brake shoes.
4. Remove the rear axle shaft.
5. Disconnect the parking brake cable and conduit.
6. Remove the screws and the rear brake disc shield.
^ To install, tighten to 8 Nm (71 inch lbs.).
7. To install, reverse the removal procedure.