ABS/TCS - RSC Lamp ON/DTC C1288 Stored
TSB 07-5-1403/19/07
DTC C1288 - WITH ROLL STABILITY CONTROL (RSC)
FORD:
2006 E-350
This article supersedes TSB 07-1-1 to update the Service Procedure.
ISSUE
Some 2006 E-Series 350 extended body vehicles equipped with a 5.4L engine may exhibit a Roll Stability Control (RSC) indicator light on with diagnostic trouble code (DTC) C1288.
ACTION
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
1. If a DTC C1288 code is discovered in the RSC module, replace the Anti-Lock Brake System (ABS) Module, refer to Workshop Manual (WSM), Section 206-09.
2. Firmly press and release the brake pedal while monitoring the MC_PRES PID. Does the PID increase with firm pressure on the brake pedal and then decrease with the brake pedal released?
a. Yes: Return the vehicle to the customer.
b. No: Install a new hydraulic control unit (HCU) . Refer to WSM, Section 206-09 Hydraulic Control Unit - Traction Control and Stability Assist. Calibrate the ABS module. Follow the scan tool directions for the calibration procedure. Clear the DTCs. Carry out the self-test with the brake pedal not applied, per the WSM, Section 206-09.
NOTE
WHEN SETTING UP VEHICLE IDENTIFICATION IN IDS AND THE PROMPT ASKS FOR AN ANSWER TO IVD YES OR NO? SELECT YES. THIS IDENTIFIES THE VEHICLE AS BEING EQUIPPED WITH ROLL STABILITY CONTROL (RSC). IVD IS A GENERIC NAME FOR RSC. THIS WILL ALLOW IDS TO COMMUNICATE WITH THE ABS MODULE. IF A 2006 E-SERIES 350 WITH ROLL STABILITY CONTROL (RSC) EXHIBITS NO COMMUNICATION WITH THE ABS MODULE WHEN USING THE IDS, DELETE THE VEHICLE SESSION IN THE IDS. THEN RE-IDENTIFY THE VEHICLE AND FOLLOW THE INSTRUCTIONS ABOVE. THIS WILL ALLOW THE IDS TO COMMUNICATE WITH THE ABS MODULE AND PROVIDE NORMAL DIAGNOSIS.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
070514A 2006 Econoline E-350 5.4L 0.7 Hr.
Engine: Check Diagnostic
Trouble Codes, Replace
The ABS Module, Includes
Time To Calibrate The
ABS Module, And Verify
Repair (Do Not Use With
2000A, 2219D, 2219D6,
2219D11, 2219D11ZH,
12651D)
070514B 2006 Econoline E-350 5.4L 2.4 Hrs.
Engine: Check Diagnostic
Trouble Codes, Replace
The ABS Module, Verify
Repair, Concern Still
Exists, Replace The HCU
Includes Time To Bleed
Brakes, And Calibrate The
ABS Module (Do Not Use
With 2000A, 2219D,
2219D6, 2219D11,
2219D11ZH, 12651D,
12651D4)
DEALER CODING
CONDITION
BASIC PART NO. CODE
2C219 04
Disclaimer