Disassembly and Assembly

Radiator - 6.0L Diesel

Disassembly and Assembly
1. Remove the radiator.





2. Remove the pushpin and radiator air deflector.





3. Remove the bolts and fan shroud.





4. Remove the 4 bolts and separate the CAC from the radiator.
^ To install, tighten to 9 Nm (80 inch lbs.).

5. NOTE: Right side shown, left side similar.

Remove the bolts and brackets from the radiator.
^ To install, tighten to 9 Nm (80 inch lbs.).





6. To assemble, reverse the disassembly procedure.
^ Install the LH bolts first, for alignment of the CAC to the radiator.