Cylinder Head

Cylinder Head

Disassembly
1. Remove the lifting bracket from the cylinder head.





2. Install the valve spring compressor.





3. NOTE: If necessary, strike the valve stem end with a plastic-tipped hammer to loosen the valve spring retainer keys.

Remove the valve spring retainer keys.
1 Remove the valve spring retainer keys.
2 Remove the Valve Spring Compressor.





4. Remove the valve spring rotator.





5. Remove the valve spring.





6. Remove the valve.





7. Remove the valve stem seal.
8. Clean and inspect the valves, valve guides and seats. If they are serviceable, resurface to specification.

Assembly





1. Install the valve stem seal.





2. Install the valve.





3. Install the valve spring.





4. Install the valve spring rotator.





5. Install the valve spring retainer keys.
1 Install the Valve Spring Compressor.
2 Install the valve spring retainer keys.





6. Remove the Valve Spring Compressor.
7. Install the lifting bracket on the cylinder head.