Instrument Cluster Finish Panel

INSTRUMENT CLUSTER FINISH PANEL

Removal and Installation
1. If equipped with tilt column, position the steering wheel in the FULL DOWN position.
2. Pull the headlamp knob to the ON position.







3. Insert a small screwdriver onto the clip and pull the knob outward.







4. Remove the headlamp switch bezel by turning it counterclockwise.
5. Remove the audio unit.







6. Remove the 2 instrument cluster finish panel screws.







7. CAUTION: To avoid damage to the instrument cluster finish panel, pull the panel forward just enough to access electrical connectors before completely removing the panel.

Remove the instrument cluster finish panel.
- Disconnect the electrical connectors.

8. To install, reverse the removal procedure.