Test E: A Single Power Window Is Inoperative - RH Rear Window
PINPOINT TEST E: A SINGLE POWER WINDOW IS INOPERATIVE - RH REAR WINDOWE1-E3:
E4-E6:
E7-E8:
Normal Operation
The RH rear window control switch receives power from the accessory delay relay through circuit 170 (RD/LB). The RH rear window control switch provides power to the RH rear window motor through circuit 884 (YE/BK) and ground through circuit 885 (YE/LB) to operate the RH rear window DOWN; and power through circuit 885 (YE/LB) and ground through circuit 884 (YE/BK) to operate the RH rear window UP.
When operating the RH rear window using the LH front window control switch, power is sent to the RH rear window control switch through circuit 316 (YE/LB) and ground through circuit 317 (GY/OG) to operate the RH rear window DOWN; and power through circuit 317 (GY/OG) and ground through circuit 316 (YE/LB) to operate the RH rear window UP.
Possible Causes
- Circuit 170 (RD/LB) open
- Circuit 316 (YE/LB) open or short to ground
- Circuit 317 (GY/OG) open or short to ground
- Circuit 884 (YE/BK) open or short to ground
- Circuit 885 (YE/LB) open or short to ground
- LH front window control switch
- RH rear window control switch
- RH rear window motor