Alternator: Service and Repair

GENERATOR







Removal and Installation
1. Disconnect the battery.
2. Rotate the front end accessory drive belt tensioner counterclockwise and position the front end accessory drive belt aside.
3. Position the protective cover aside and remove the generator B+ terminal nut.
- To install, tighten to 9 Nm (80 lb-in).

4. Disconnect the generator B+ terminal and the 2 electrical connectors.
5. Remove the 3 bolts and the generator.
- To install, tighten to 47 Nm (35 lb-ft).

6. If necessary, remove the nut and the generator pulley.
- To install, tighten to 109 Nm (80 lb-ft).

7. To install, reverse the removal procedure.