Rear Seat Backrest - Bench, Crew Cab
REAR SEAT BACKREST - BENCH, CREW CABDisassembly and Assembly
1. Remove the rear bench seat backrest.
2. Remove the 2 armrest bracket bolts, if so equipped, to remove the armrest from the assembly.
- To install, tighten to 12 Nm (9 lb-ft).
3. Remove the rubber insert.
4. Remove the screws and cupholder.
5. Unzip the armrest cover and remove from the armrest.
6. Unfasten the seat back cover J-clips and remove the cover.
7. Remove the seat back cushion foam pad from the seat track frame.
8. Remove the 4 armrest bolts and remove armrest the. brackets.
- To install, tighten to 50 Nm (37 lb-ft).
9. To assemble, reverse the disassembly procedure.