Rear Door Window Regulator: Service and Repair

REAR DOOR WINDOW REGULATOR AND MOTOR

Crew Cab:

SuperCab:

Removal and Installation

With power windows
1. Remove the window control switch.

With manual windows







2. Remove the window regulator handle screw.
1 Position the window regulator handle cover aside.
2 Remove the window regulator handle retaining screw and the window regulator handle.

All vehicles
3. Remove the door trim panel and watershield.

4. NOTE: Do not remove the window glass from the door.

Remove the window glass from the window regulator.

5. Tape the window glass in the full UP position.







6. Disconnect the window motor electrical connector (power windows only).







7. Loosen the nuts and pull the rear door window regulator from the mounting position.
- To install, tighten to 13 Nm (10 lb-ft).

8. Remove the rear door manual window regulator from the door.
9. To install, reverse the removal procedure.