Power Steering Pump Pulley
Power Steering Pump PulleySpecial Tool(s):
Removal
Vehicles with 6.0L engine
1. Remove the engine cooling fan.
All vehicles
2. NOTE: Vehicle with air conditioning shown, vehicle without air conditioning similar.
Rotate the accessory drive belt tensioner and remove the accessory drive belt from the power steering pump pulley.
^ For vehicles with air conditioning, rotate the tensioner clockwise.
^ For vehicles without air conditioning, rotate the tensioner counterclockwise.
Vehicles with 5.4L and 6.8L engine
3. With the vehicle in NEUTRAL, position it on a hoist.
All vehicles
4. Using the special tool, remove the pulley.
^ Inspect the pulley for paint marks in the web area near the hub. If there are 2 paint marks, discard the pulley. If there is no paint or 1 paint mark, use a paint pencil to mark the web area of the pulley near the hub.
Installation
All vehicles
1. CAUTION: Replacement of the power steering pump pulley is necessary after being removed and installed 2 times.
Using the special tool, install the power steering pump pulley.
2. NOTE: Vehicle with air conditioning shown, vehicle without air conditioning similar.
Rotate the accessory drive belt tensioner and install the accessory drive belt on the power steering pump pulley.
^ For vehicles with air conditioning, rotate the tensioner clockwise.
^ For vehicles without air conditioning, rotate the tensioner counterclockwise.
Vehicles with 6.0L engine
3. Install the engine cooling fan.