Roof Opening Panel Alignment - Height Adjustment

ROOF OPENING PANEL ALIGNMENT - HEIGHT ADJUSTMENT

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new roof opening panel assembly has been installed.

1. Position the roof opening panel in the CLOSED position.
2. Loosen the 4 roof opening panel bolts.







3. Position the roof opening panel to the roof panel as specified.
4. Maintain the roof opening panel position and tighten the 4 roof opening panel bolts to 4 Nm (35 lb-in).
5. Reinitialize the roof opening panel motor.