Compass Zone Adjustment

COMPASS ZONE ADJUSTMENT

Compass Calibration Zones:

1. The factory zone setting is set to Zone 8. Check the Compass Calibration Zone map to verify the correct compass zone setting for your geographic location.
2. Turn the ignition switch to the RUN position.
3. From the info menu, press and hold the SETUP and RESET buttons simultaneously until the message center shows the current zone setting.
4. Release the SETUP and RESET buttons. Press the SETUP button until the correct zone setting is displayed.
5. To exit the zone setting mode, and to lock in the change, press and release the RESET button.