Wheel Speed Sensor - Front

Wheel Speed Sensor - Front, 4x4

Wheel Speed Sensor - Front, 4X4:

Removal and Installation
1. Remove the front disc brake rotor shield.
2. Disconnect the front wheel speed sensor electrical connector.
3. Remove the 4 wheel speed sensor harness retainers.

CAUTION: Make sure the ABS harness is properly routed to prevent the disc from cutting the ABS harness.

4. Remove the screw and the front wheel speed sensor.
^ To install, tighten to 18 Nm (13 ft. lbs.).
5. To install, reverse the removal procedure.