Connecting Rod: Specifications
Connecting RodRod-to-pin clearance 0.009-0.023 mm (0.0004-0.0009 inch)
Pin bore diameter 22.012-22.024 mm (0.8666-0.8671 inch)
Rod length (center-to-center) 150.7 mm (5.933 inch)
Maximum allowed bend 0.038 mm (0.0015 inch)
Maximum allowed twist a 0.05 mm (0.0020 inch)
Bearing bore diameter (with assembled liners) 53.049-53.027 mm (2.0885-2.0877 inch)
Bearing-to-crankshaft clearance 0.024-0.066 mm (0.0009-0.0026 inch)
Side clearance 0.5-0.15 mm (0.02-0.006 inch)
a The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 105.5 mm on each side of rod centerline.
Connecting rod bolts
First pass 43 Nm (32 ft. lbs.)
Final pass tighten 105°