Exhaust Manifold - RH

Exhaust Manifold - RH

Exhaust Manifold - RH:

Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the exhaust manifold-to-dual converter Y-pipe nuts.
3. Remove the nuts, the RH exhaust manifold and the gasket.
^ Discard the nuts and the gasket.
4. Remove and discard the 6 RH exhaust manifold studs.

Installation
1. Inspect the RH exhaust manifold for flatness.
2. Install 6 new RH exhaust manifold studs.
^ Tighten to 12 Nm (9 ft. lbs.).
3. Position a new gasket and the RH exhaust manifold and install 6 new nuts.
^ Tighten to 20 Nm (15 ft. lbs.).
4. Position the dual converter Y-pipe and install the nuts.
^ To install, tighten to 40 Nm (30 ft. lbs.).