Cooling Fan

Cooling Fan - 2.3L

Special Tool(s):

1. Remove the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
2. Remove the accessory drive belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.





3. Using the special tool to hold the fan pulley, loosen the cooling fan clutch nut.
^ To install, tighten to 55 Nm (41 ft. lbs.).
4. Remove the fan and clutch assembly.
5. If necessary, remove the fan-to-fan clutch bolts and separate the fan from the fan clutch.
^ To install, tighten to 7 Nm (62 inch lbs.).
6. To install, reverse the removal procedure.