Auxiliary Heater Core
AUXILIARY HEATER CORERemoval and Installation
NOTE: If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle.
1. Drain the engine cooling system.
2. If equipped, remove the LH quarter trim panel.
3. Remove the heater core cover.
1 Remove the 6 screws.
2 Remove the heater core cover.
4. Disconnect the heater hoses.
5. Remove the heater core.
1 Remove the heater core case seal.
2 Remove the heater core.
6. To install, reverse the removal procedure.
- Lubricate the coolant hoses with plain water, if needed.
7. Fill the engine cooling system.