Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Bumper - Front
BUMPER - EXPLODED VIEW, FRONTPart 1:
Part 2:
BUMPER - FRONT
Removal and Installation
1. Remove the front bumper cover.
2. Remove the 6 front bumper bolts (3 each side).
- To install, tighten to 67 Nm (49 lb-ft).
3. Remove the 4 upper and lower bumper-to-radiator support bolts (2 each side).
- To install, tighten to 9 Nm (80 lb-in).
4. Remove the front bumper.
5. To install, reverse the removal procedure.